{
  "revision": "R11",
  "date": "2026-10-09",
  "fabrication_release": false,
  "source_pcb": "CARRIER_XEM8305_R11_Complete_3D_BRK_JTAG.kicad_pcb",
  "source_pcb_sha256": "e36b77df37f73f4b4baed6676943037ce2c1ec2c742145e32dd0cc0a5a4883e9",
  "board": {
    "size_mm": [
      53,
      83
    ],
    "copper_layers": 6,
    "footprints": 81,
    "fitted_component_bodies": 75,
    "bare_features": [
      "MH1",
      "MH2",
      "MH3",
      "MH4",
      "TP19",
      "TP20"
    ],
    "segments": 602,
    "vias": 213
  },
  "native_pcb_checks": {
    "violations": 0,
    "unconnected_items": 0,
    "schematic_parity_findings": 0,
    "retained_ignored_categories": [
      "missing_courtyard",
      "track_not_centered_on_via",
      "tuning_profile_track_geometries",
      "footprint_filters_mismatch",
      "footprint_type_mismatch"
    ]
  },
  "schematic_erc": {
    "inherited_findings": 223,
    "unused_connector_pins": 210,
    "off_grid": 13
  },
  "native_brk8305_jtag_comparison": {
    "fitted_positions": 50,
    "connected_groups": 49,
    "pcb_pads": 197,
    "restored": [
      "C522 100 nF shield bypass",
      "FB503 220 ohm at 100 MHz shield filter",
      "C528 100 nF target 1.8 V bypass"
    ],
    "intentional_part_adaptations": [
      "USB4110-GF-A edge-facing socket replaces USB4120-03-C",
      "Blank 93LC56B-E/MS replaces programmed CFG001"
    ]
  },
  "qualification_open": [
    "EEPROM provisioning and Vivado hardware validation",
    "Powered operation and rail/load/thermal checks",
    "Signal timing and SI/PI",
    "Assembled connector fit and clearances",
    "Factory and assembly qualification"
  ],
  "publication": "R11 review visuals and schematic only. Earlier R5 four-layer CAD/Gerbers are preserved separately."
}